Indesit KN6G21S(X)/RO Istruzioni per l'uso Pagina 6

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 52
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 5
6
GB
! If one or more of these conditions is not fulfilled
or if the cooker must be installed according to the
conditions listed for class 2 - subclass 1 appliances
(installed between two cupboards), the flexible steel
hose must be used instead (see below).
Connecting a flexible jointless stainless steel pipe
to a threaded attachment
Make sure that the hose and gaskets comply with
current national legislation.
To begin using the hose, remove the hose holder on
the appliance (the gas supply inlet on the appliance is
a cylindrical threaded 1/2 gas male attachment).
! Perform the connection in such a way that the hose
length does not exceed a maximum of 2 metres,
making sure that the hose is not compressed and does
not come into contact with moving parts.
Checking the tightness of the connection
When the installation process is complete, check the
hose fittings for leaks using a soapy solution. Never
use a flame.
Adapting to different types of gas
It is possible to adapt the appliance to a type of gas
other than the default type (this is indicated on the
rating label on the cover).
Adapting the hob
Replacing the nozzles for the hob burners:
1. Remove the hob grids and
slide the burners off their seats.
2. Unscrew the nozzles using
a 7 mm socket spanner (see
gure), and replace them with
nozzles suited to the new type
of gas (see Burner and nozzle
speci cations table).
3. Replace all the components
by following the above instructions in reverse.
Adjusting the hob burners’ minimum setting:
1. Turn the tap to the minimum position.
2. Remove the knob and adjust the regulatory screw,
which is positioned inside or next to the tap pin, until
the flame is small but steady.
! If the appliance is connected to a liquid gas supply,
the regulatory screw must be fastened as tightly as
possible.
3. While the burner is alight, quickly change the position of
the knob from minimum to maximum and vice versa several
times, checking that the flame is not extinguished.
! The hob burners do not require primary air
adjustment.
Adapting the oven
Replacing the oven burner
nozzle:
1. Open the oven door fully
2. Pull out the sliding oven
bottom (see diagram).
3. Remove the oven burner
after unscrewing the screws V
(see  gure).
4. Unscrew the nozzle using a
special nozzle socket spanner
(see  gure) or with a 7 mm
socket spanner, and replace it
with a new nozzle that is suited
to the new type of gas (see Burner and nozzle speci cations
table).
Adjusting the gas oven burner’s minimum setting:
1. Light the burner (see Start-up and Use).
2. Turn the knob to the minimum position (MIN)
after it has been in the maximum position (MAX) for
approximately 10 minutes.
3. Remove the knob.
4. Tighten or loosen the adjustment screws on the
outside of the thermostat pin (see  gure) until the flame
is small but steady.
! In the case of natural gas, the adjustment screw must
be unscrewed by turning it anti-clockwise.
V
Vedere la pagina 5
1 2 3 4 5 6 7 8 9 10 11 ... 51 52

Commenti su questo manuale

Nessun commento

Watson-Marlow 323Du podręczniki

Instrukcje obsługi i podręczniki użytkownika dla Pompy Watson-Marlow 323Du.
Dostarczamy 2 pdf podręczników Watson-Marlow 323Du do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika






Więcej produktów i instrukcji dla Pompy Watson-Marlow

Modele Rodzaj dokumentu
300 Series Instrukcja Użytkownika   Watson-Marlow 300 Series User Manual, 2 strony
205S Instrukcja Użytkownika   Watson-Marlow 205S User Manual, 13 strony
323Dz Instrukcja Użytkownika   Watson-Marlow 323Dz User Manual, 53 strony
505LA Instrukcja Użytkownika   Watson-Marlow 505LA User Manual, 11 strony
SPS Instrukcja Użytkownika   Watson-Marlow SPS User Manual, 142 strony
620U Instrukcja Użytkownika   Watson-Marlow 620U User Manual, 100 strony
620R Instrukcja Użytkownika   Watson-Marlow 620R User Manual, 19 strony
701 Instrukcja Użytkownika   Watson-Marlow 701 User Manual, 25 strony
700 series Instrukcja Użytkownika   Watson-Marlow 700 series User Manual, 11 strony
PD/40 Instrukcja Użytkownika   Watson-Marlow PD/40 User Manual, 24 strony
Qdos30 Universal Instrukcja Użytkownika   Watson-Marlow Qdos30 Universal User Manual, 78 strony
DuCoNite 25 Instrukcja Użytkownika   Watson-Marlow DuCoNite 25 Manuel d'utilisation, 76 strony
120S/DV Instrukcja Użytkownika   Watson-Marlow 120S/DV Manuel d'utilisation, 29 strony
520Du Instrukcja Użytkownika   Watson-Marlow 520Du Manuel d'utilisation, 107 strony
501RL ATEX Instrukcja Użytkownika   Watson-Marlow 501RL ATEX Manuel d'utilisation, 10 strony
520DiN Instrukcja Użytkownika   Watson-Marlow 520DiN Manuel d'utilisation, 151 strony
120F/DV Instrukcja Użytkownika   Watson-Marlow 120F/DV Manuel d'utilisation, 25 strony
505L Instrukcja Użytkownika   Watson-Marlow 505L Manuel d'utilisation, 17 strony
Bredel 265 Instrukcja Użytkownika   Watson-Marlow Bredel 265 Manuel d'utilisation, 96 strony
Qdos30 Remote Instrukcja Użytkownika   Watson-Marlow Qdos30 Remote Manuel d'utilisation, 40 strony